Description
The MS1100 is an on-line VOC gas monitoring system which provides low level measurements of VOCs in air.
It is designed to provide:
- Chimney stack emission monitoring
- Environmental monitoring with high sensitivity
- Drain Monitoring
- Flammable gas detection
Principle of Operation
The MS1100 utilises an array of sensors to detect volatile gases and provides a highly reliable measurement system with very low maintenance requirements.
Control and Monitoring Options
The instrument is housed in a robust steel enclosure and can be powered from either 90 – 240V AC or 24V DC supplies.
Various communications options are available including 4 – 20mA, Profibus and Modbus.
This monitor is also available as a standalone unit without sampling system.
An ATEX compliant version of this system is available on request.
Specifications:
- Range*: 0 – 100 ppm in air
- Accuracy**: +/-10%
- Repeatability: +/-2%
- Sampling Frequency: 5 – 20 Minutes
- Data Storage: µSD Card and Internal Memory
- Data Interface: 4 – 20mA, Profibus, Modbus, Wireless, USB
- Alarms: x2 Via Relay Drivers, Levels User Definable
- Operating Temperature Range: 0o – 40oC
- Water Temperature Range: 1o – 40oC
- Power Consumption: 10W Continuous (90-240VAC or 24VDC)
- Reagents: None
- Carrier Gas: None
- Consumables: GAC filter media, Air Filter every 6 months
- Calibration: Every 6 Months
*Other ranges available. Please contact us for more informtion.
** 20ppm toluene in air, 25oC
Key Benefits:
- High sensitivity
- Can be calibrated for specific gases
- User definable alarm levels
- Low cost of ownership
![](https://www.cr-enviro.com/new/wp-content/uploads/2018/08/oil-in-water-1024x283.jpg)
For more information, please download the Datasheet below:
![2018-07-16 (2)](https://cr-enviro.com/new/wp-content/uploads/2018/05/2018-07-16-2-230x300.png)
MS1200-SYS-Air-VOC-Gas-Monitor
[CONTACT_FORM_TO_EMAIL id=”1″]